Shop Pella Reserve – Traditional Wood Arched Windows

Pella Reserve products offers exquisite wood types to enhance your home's design. Learn more about materials.

And, we stand behind them with a limited lifetime warranty. See written Limited Warranty for details, including exceptions and limitations.

Materials

Pine
Unfinished Mahogany
Douglas Fir

Materials

Pella's EnduraGuard® wood protection formula has three active ingredients. This powerful combination, together with our immersion-treatment method, helps ensure strong protection on every exterior wood surface of our products. The result is advanced protection against the effects of moisture, decay and stains from mold and mildew.

Prefinished Interior Stains

Pella wood products can arrive factory-prefinished in your choice of a variety of stains and paints. Primed ready-to-paint interiors are also available.

Natural
Golden Oak
Early American
Provincial
Dark Mahogany
Charcoal
Black

Exterior Finishes

Aluminum-Clad Wood - Durable, low-maintenance EnduraClad aluminum cladding with EnduraClad protective finish meets the performance requirements of AAMA 2604. Seacoast EnduraClad protective finish for coastal projects with high salt exposure. 70% fluoropolymer resin-based EnduraClad Plus protective finish for select projects, meets the performance requirements of AAMA 2605.

Wood - Pella offers primed and ready-to-paint or unfinished wood exteriors.

Low-E Insulating Glass

Low-E glass has a coating that is applied to reflect heat and keep your home comfortable. It helps to prevent your carpet, furniture and window treatments from fading by blocking most of the sun’s harmful UV rays.

Advanced Low-E Insulating Glass
SunDefense™ Low-E with Argon
SunDefense+ Low-E Insulating
NaturalSun Low-E with Argon
NaturalSun+ Low-E Insulating

Patterns

Cross
Custom
New England
Traditional
12-Lite Prairie
Victorian
14-Lite Prairie

Grille Profiles

Integral Light Technology® (ILT) Grilles - Combine the historical look of true divided lights with today's energy efficiency, structural integrity and water-resistant performance. Grilles are adhered to the outside of the glass – wood on the interior and aluminum on the exterior. Between-the-glass nonglare spacers, which are aligned with the interior and exterior grilles, replicate the appearance of true divided lights. Grilles have been approved by the National Park Service on a project-by-project basis for use on historic projects involving federal tax credits.

Grilles-between-the-glass - Permanent aluminum grilles are factory-installed inside the airspace of insulating glass to provide the look of divided lights while making glass cleaning easy. Exterior finish matches aluminum-cladding color.

Curved Shapes - Fixed	Frame cannot exceed 96" in both directions. For units with colored glazing (bronze, gray or green), frame cannot exceed 11' 0-3/4" in either direction. Maximum frame < 54.5 ft2 (based on rectangular unit).
Curved Shapes - Roto Operator with Side Pivot Hinge	Maximum frame size is 19.5 ft2 (based on rectangular unit). Sash opening will be limited to the angle shown on chart below. Units will not meet egress requirements. Frame width cannot exceed hinge jamb height. Unit must be hinged off of short jamb if arc height (Y) divided by arc width (W) is greater than 0.364". Unit is not valid if arc height (Y) is greater than arc width (W). Partial units must be true half springlines to vent (R = W).
Custom Stile and Rail Widths	The dimension shown can vary from 1-7/8" to 5-3/4" (on 1/8" increments). Any members meeting at an angle not equal to 90° and springline must be the same width. Bottom rail available with A dimension from 1-7/8" to 15" (on 1/8" increments).

Hardware	Optional factory applied limited opening hardware available for vent units in stainless steel; nominal 3" opening. Optional factory applied window opening control device. Device allows window to open less than 4" with normal operation, with a release mechanism that allows the sash to open completely
SureLock® System	A single handle locking system operates positive-acting arms that reach out and pull the sash into a locked position: one operating lock installed on units with frame height 29" and less, two unison operating locks installed on units with frame height over 29".
InView™ Screens	Vinyl-coated 18/18 mesh fiberglass screen cloth complying with the performance requirements of SMA 1201, set in aluminum frame fitted to inside of window, supplied complete with all necessary hardware. Screen frame finish is baked enamel, wrapped in wood veneer, factory prefinished stain to match interior finish.

Pella® Reserve™ – Traditional Wood Arched Window

Reserve - Traditional Arched Window Features

Design Options

Downloads & Specifications

Pella® Reserve™

Other Pella Reserve - Traditional Products